Access Point HP 560 J9845A, 802.11AC 1.3Gbps, 3x3 MIMO

Thương hiệu: (Đang cập nhật ...) Loại: (Đang cập nhật ...)

1.400.000₫

- Access Point HP 560 J9845A.

- Hàng đã sử dụng, like new.

- BH 3 tháng 1 đổi 1.


chinh-sach
Giao hàng toàn quốc
chinh-sach
Giao hàng ngay sau khi đặt hàng
chinh-sach
Tư vấn 24/7
chinh-sach
Nhà cung cấp xuất hóa đơn cho sản phẩm này

Key features

  • Three-spatial stream 802.11ac MIMO AP

  • Up to 1.3 Gb/s on the 802.11ac radio and 450 Mb/s on the 2.4 GHz 802.11n radio

  • Built-in spectral analysis scans the 2.4 GHz and 5 GHz bands to identify sources of RF

  • Comprehensive WLAN security with intrusion detection offers threat protection

  • Limited Lifetime Warranty

Management

  • Wi-Fi Clear Connect:

    Provides a system-wide approach to improving WLAN reliability by proactively determining and adjusting to changing RF conditions; helps optimize WLAN performance by detecting interference from Wi-Fi and non-Wi-Fi sources using spectrum analysis capabilities built into the access points, identifying rogue activity and making decisions at a system-wide level.

  • Advanced radio resource management:

    • Automatic radio power adjustments:

      Include real-time power adjustments based on changing environmental conditions and signal coverage adjustment.

    • Automatic radio channel:

      Provides intelligent channel switching and real-time Interference detection.

    • Intelligent client load balancing:

      Determines number of clients across neighboring APs and adjusts client allocation to balance the load.

    • Airtime fairness:

      Provides equal RF transmission time for wireless clients.

  • Spectrum analysis:

    • Power/frequency spectrum analysis:

      Measures noise from IEEE 802.11 remote sources.

    • Signal detection/classification:

      Identifies source of RF interference, for example, Bluetooth, cordless phones, and microwave ovens.

    • Evaluation of channel quality:

      Helps detect severe channel degradation and improve the reporting of poor RF performance.

  • Integrated wireless IDS/IPS:

    Detects and locates and mitigates unknown and rogue devices (see controller datasheet for details).

  • Access point management:

    Provides secure Web browser (SSL and VPN), command-line interface, SNMP v2c, SNMP v3, MIB-II with traps, and RADIUS Authentication Client MIB (RFC 2618); offers embedded HTML management tool with secure access (SSL and VPN); implements scheduled configuration and firmware upgrades from a central controller.

  • HP Intelligent Management Center and Wireless Services Manager Software:

    Provides central management for discovery, logging, status, and configuration management.

  • Diagnostics:

    Records association, authentication, and DHCP events in client event log; packet capture tool for Ethernet and IEEE 802.11 interfaces (PCAP format); includes data rate matrix.

  • Enhanced AP survivability:

    Continues to operate using the old IP address while the AP searches for a new controller.

  • Compatible with HPE MSM Controllers, HPE Unified Switches, HPE Unified Controllers and Module.
    • Refer to the HPE Access Point - Controller Compatibility Matrix

    • Refer to the release notes for minimum version numbers required.

Quality of Service (QoS)

  • Rate limiting:

    Supports per-wireless client ingress-enforced maximums and per-wireless client, per-queue guaranteed minimums.

  • Centralized traffic:

    Maintains Layer 2 and Layer 3 QoS settings when using centralized traffic or guest access.

  • IEEE 802.1p prioritization:

    Delivers data to devices based on the priority and type of traffic.

  • Wireless:

    • L2/L3/L4 classification:

      Supports IEEE 802.1p VLAN priority, SpectraLink SVP, and DiffServ.

    • Virtual Service Community (VSC):

      Assigns Wi-Fi MultiMedia (WMM), IEEE 802.11e EDCF, and Service-Aware priority.

    • VoIP call capacity:

      Supports 12 active calls per radio, maximum.

  • SpectraLink Voice Priority (SVP) support:

    Prioritizes SpectraLink voice IP packets sent from a SpectraLink NetLink SVP server to SpectraLink wireless voice handsets to help ensure excellent voice quality.

Connectivity

  • IEEE 802.3 Power over Ethernet (PoE):

    • Simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location.

    • 802.3at the AP will operate with both radios at full performance, 3 x 3:3 MIMO mode.

    • 802.3af the 802.11a/n/ac 5 GHz radio will operate at full performance 3 x 3:3, while the 802.11b/g/n 2.4 GHz radio will run in 2 x 2:2 MIMO mode.

  • Auto-MDIX:

    Adjusts automatically for straight-through or crossover cables on the Ethernet interface.

Mobility

  • Three spatial stream MIMO technology:

    Provides the latest in Wi-Fi technology, which allows for 1.3 Gb/s in the 5 GHz frequency band and 450 Mb/s in the 2.4 GHz band of signaling.

  • Bandsteering:

    Redirects 5 GHz capable clients automatically to the less-congested 5-GHz spectrum.

  • HPE 560 Embedded antennas:

    Provides excellent coverage through use of embedded high-gain antennas (5 dBi antenna at 2.4 GHz and 7 dBi antenna at 5 GHz); no need for the added cost of external antennas.

  • Anywhere, anytime wireless coverage:

    Dual-radio IEEE 802.11b/g/n and 802.11a/n/ac access point; per-radio software-selectable configuration of frequency bands.

    Self-healing, self-optimizing local mesh that extends network availability.

    Wi-Fi Alliance Certifications for interoperability with all IEEE 802.11a/b/g/n/ac client devices.

  • Medical standards:

    Meets the European EN60601-1-2 standard for healthcare.

  • Virtual Service Communities (VSCs):

    Includes up to 16 SSIDs per radio, each with unique MAC address and configurable SSID broadcasts; individual security and QoS profiles per VSC; configurable DTIM and minimum data rate per VSC; VSCs that can be mapped to separate IEEE 802.1Q VLANs; WMM and/or WMM-PS; a security filter; and an IP filter.

  • AP client access control functions:

    • Offers IEEE 802.1X authentication using EAP-SIM, EAP-FAST, EAP-TLS, EAP-TTLS, and PEAP delivers MAC address authentication using local or RADIUS access lists.

    • Provides RADIUS AAA using EAP-MD5, PAP, CHAP, and MS-CHAPv2.

    • Supports RADIUS Client (RFC 2865 and 2866) with location-aware support.

    • Provides Layer 2 wireless client isolation.

Security

  • Integrated IDS support:

    • Automated AP and client classification:

      Reduces manual effort (administrator can override AP classification).

    • Comprehensive detection capabilities:

      Detects a wide range of attacks.

    • Flexible event reporting:

      Enables configuration of which events will result in notifications.

    • Location tracking capabilities:

      Helps identify the location of a rogue device.

    • Flexible deployment models:

      Supports time slicing or dedicating a radio to detect full time.

  • IEEE 802.1x support:

    Provides port-based user authentication with support for Extensible Authentication Protocol (EAP) MD5, TLS, TTLS, and PEAP with choice of AES, TKIP, and static or dynamic WEP encryption for protecting wireless traffic between authenticated clients and the access point.

  • Choice of IEEE 802.11i, WPA2, or WPA:

    Locks out unauthorized wireless access by authenticating users prior to granting network access; robust Advanced Encryption Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of wireless traffic.

  • TKIP/WEP encryption:

    Supported only on legacy IEEE 802.11a/b/g clients as it has been deprecated from the IEEE 802.11n and 802.11ac standards.

  • Local wireless bridge client traffic filtering:

    Prevents communication between wireless devices associated with the same access point.

Additional information

RFC Support

Refer to the controller datasheet for specific RFCs and other industry standards supported

popup

Số lượng:

Tổng tiền: